640X480mm P2.5mm Indoor Die-cast Front Service LED Display is currently the hot selling product in LED display industry as the size of display cabinet is very samll, the weight is very light, the display effect is excellet and cost-effective, EagerLED P2.5 rental LED display is a indoor led produts and it can be used for many applications such as hotel, airport, store, shopping mall, govement, TV show, exhibition, conference room, control room and more becauase of its excellent feature with high refresh rate, high gray level and high contrast.
640X480mm P2.5mm Indoor Die-cast Front Service LED Display is made with high hardness die-casting aluminum and top quality nationstar LED and good driver IC to ensure the LED display with better color uniformity. It has many features as following:
FEATURES OF 640X480mm P2.5mm Indoor Die-cast Front Service LED Display
• Lamp type: SMD2121
• Module Resolution: 128X64dots
• Module Size: 320X160mm
• Cabinet Size: 640X480mm
• Cabinet Material: Die-cast Aluminum
• Cabinet Resolution: 256X192dots
• Cabinet Density: 36,864 dots/cabinet
• Cabinet Weight: 8kg
• Refresh Rate: ≥3,840Hz
• Gray Grade: 14 bits
1.Drilling with an electric drill.
2.Hammer the steel nail into the borehole.(A cabinet requires at least two steel nails.)
3.Hang the cabinet on the steel nail.
4.Connect the cable and signal cables in sequence between the cabinets.
5.After connecting the power cable and signal cable of the module, install the module on the cabinet.
6.Refer to point 5 to complete the installation of the remaining cabinets.
The video of 640X480mm P2.5mm indoor die cast front service LED display installation method