EA640F3 จอแสดงผล LED ในอาคาร

Request an EA640F3 Configuration and Quote
Related video from the EA640F2 product page. Use the EA640F3 specifications below for this model.
EA640F3 Indoor LED Display for Fixed Video Walls
The EA640F3 indoor LED display is built for permanent video walls in conference rooms, studios, control rooms and other commercial interiors. Each 640 × 480 mm die-cast aluminum cabinet is 60 mm deep and weighs 7.3 kg (16.1 lb). Magnetic modules, the power supply and the receiving card are all accessible from the front.
Choose an SMD configuration from P1.25 to P4 or a flip-chip COB configuration from P1.25 to P1.86. Start with the closest seat and the smallest text or graphic people need to read, then check the cabinet grid against the available wall opening. Browse the indoor fixed LED display range to compare cabinet formats.

Front Service for Wall-Mounted Installations
The EA640F3 uses six magnetic 320 × 160 mm LED modules per cabinet. A technician can lift out an individual module from the viewing side with a suitable vacuum service tool. The power supply and receiving card can also be accessed from the front, which makes the design suitable for walls with limited rear access.
Keep working space in front of the display and check that surrounding trim can be removed where needed. During commissioning, document the module orientation and receiving-card settings so future replacements can be fitted and configured correctly.

640 × 480 mm Cabinet Grid and 16:9 Layout
Each cabinet has a 4:3 aspect ratio. A four-wide by three-high grid makes a 2,560 × 1,440 mm, 16:9 video wall from 12 standard cabinets. At P1.25 this layout has a native resolution of 2,048 × 1,152 pixels. At P2 the same physical grid has a native resolution of 1,280 × 720 pixels.
Confirm both the active display size and the native canvas before ordering. Match the processor output to the cabinet map, and verify that source layouts, subtitles and presentation graphics remain legible at that resolution.

60 mm Cabinet Depth and 7.3 kg Cabinet Weight
The EA640F3 cabinet measures 60 mm deep and weighs 7.3 kg (16.1 lb). Twelve cabinets account for 87.6 kg (193 lb) of cabinet weight. Add the mounting structure, cabling and trim when assessing the total installed load.
For recessed projects, measure the complete build-out from the support structure to the finished display face. Allow room for connector bends, ventilation and alignment adjustments, and confirm mounting and load requirements with the project installer.

Die-Cast Aluminum Cabinet for Modular Assembly
The die-cast aluminum enclosure provides a rigid frame for aligning adjacent cabinets. The 640 × 480 mm format lets designers calculate the active wall area before specifying support and trim. It also gives installers a repeatable cabinet layout for larger video walls.
Measure the supporting frame before fitting the modules. Check seams under solid colors and fine graphics during commissioning, since uneven alignment can be more noticeable with uniform content and at short viewing distances.

Quick Locks and an Integrated Adapter Board
Quick locks join adjacent cabinets during assembly. Inside each cabinet, an integrated adapter board organizes module connections and leaves the power supply and receiving card accessible from the front. The cabinet locks join cabinets to one another. Specify the support structure for the full wall assembly separately.
Record the cabinet and cable routing when the wall is commissioned. Marking the power and signal paths makes it easier to identify which connection feeds a module or cabinet during a service visit.

SMD and Flip-Chip COB Pixel Pitch Options
SMD configurations cover P1.25, P1.53, P1.86, P2, P2.5, P3.076 and P4. The fine-pitch SMD models through P2 are listed with GOB protection. Flip-chip COB options are P1.25, P1.53 and P1.86. Compare the actual module surface, pitch and brightness for the installation environment.
The listed SMD options deliver 600–800 cd/m² depending on pitch. The listed COB options deliver 600 cd/m². Both offer a specified refresh frequency of at least 3,840 Hz. For camera use, test the final configuration with the intended frame rate, shutter speed and brightness. See conference room LED display applications for a related planning reference.

SMD Specifications
| Specification | P1.25 | P1.53 | P1.86 | P2 | P2.5 | P3.076 | P4 |
|---|---|---|---|---|---|---|---|
| รุ่น | EA640F3-P1.25 (GOB) | EA640F3-P1.53 (GOB) | EA640F3-P1.86 (GOB) | EA640F3-P2 (GOB) | EA640F3-P2.5 | EA640F3-P3.076 | EA640F3-P4 |
| แพคเกจ LED | SMD1010 | SMD1212 | SMD1515 | SMD1515 | SMD2020 | SMD2020 | SMD2020 |
| ความหนาแน่นของพิกเซล (พิกเซล/ตร.ม.) | 640,000 | 422,500 | 288,906 | 250,000 | 160,000 | 105,688 | 62,500 |
| ความละเอียดของโมดูล (พิกเซล) | 256 128 × | 208 104 × | 172 86 × | 160 80 × | 128 64 × | 104 52 × | 80 40 × |
| อัตราส่วนการสแกน | 1/64 | 1/52 | 1/43 | 1/40 | 1/32 | 1/26 | 1/20 |
| Cabinet size (W × H × D) | 640 480 ×× 60 มิลลิเมตร | 640 480 ×× 60 มิลลิเมตร | 640 480 ×× 60 มิลลิเมตร | 640 480 ×× 60 มิลลิเมตร | 640 480 ×× 60 มิลลิเมตร | 640 480 ×× 60 มิลลิเมตร | 640 480 ×× 60 มิลลิเมตร |
| Module size (W × H) | 320 × 160 มม | 320 × 160 มม | 320 × 160 มม | 320 × 160 มม | 320 × 160 มม | 320 × 160 มม | 320 × 160 มม |
| น้ำหนักคณะรัฐมนตรี | 7.3 กก. (ปอนด์ 16.1) | 7.3 กก. (ปอนด์ 16.1) | 7.3 กก. (ปอนด์ 16.1) | 7.3 กก. (ปอนด์ 16.1) | 7.3 กก. (ปอนด์ 16.1) | 7.3 กก. (ปอนด์ 16.1) | 7.3 กก. (ปอนด์ 16.1) |
| มุมมอง | ° 140 | ° 140 | ° 140 | ° 140 | ° 140 | ° 140 | ° 140 |
| เฉดสีเทา | บิต 14 | บิต 14 | บิต 14 | บิต 14 | บิต 14 | บิต 14 | บิต 14 |
| เพาเวอร์อินพุต | ไฟฟ้ากระแสสลับ 100–240 โวลต์, 50–60 เฮิรตซ์ | ไฟฟ้ากระแสสลับ 100–240 โวลต์, 50–60 เฮิรตซ์ | ไฟฟ้ากระแสสลับ 100–240 โวลต์, 50–60 เฮิรตซ์ | ไฟฟ้ากระแสสลับ 100–240 โวลต์, 50–60 เฮิรตซ์ | ไฟฟ้ากระแสสลับ 100–240 โวลต์, 50–60 เฮิรตซ์ | ไฟฟ้ากระแสสลับ 100–240 โวลต์, 50–60 เฮิรตซ์ | ไฟฟ้ากระแสสลับ 100–240 โวลต์, 50–60 เฮิรตซ์ |
| ความถี่ของเฟรม | ≥60เฮิรตซ์ | ≥60เฮิรตซ์ | ≥60เฮิรตซ์ | ≥60เฮิรตซ์ | ≥60เฮิรตซ์ | ≥60เฮิรตซ์ | ≥60เฮิรตซ์ |
| รีเฟรชความถี่ | ≥3,840เฮิรตซ์ | ≥3,840เฮิรตซ์ | ≥3,840เฮิรตซ์ | ≥3,840เฮิรตซ์ | ≥3,840เฮิรตซ์ | ≥3,840เฮิรตซ์ | ≥3,840เฮิรตซ์ |
| อุณหภูมิในการทำงาน | -20 ถึง +60 °C | -20 ถึง +60 °C | -20 ถึง +60 °C | -20 ถึง +60 °C | -20 ถึง +60 °C | -20 ถึง +60 °C | -20 ถึง +60 °C |
| ระดับการป้องกัน | IP31 | IP31 | IP31 | IP31 | IP31 | IP31 | IP31 |
| ความสว่าง (cd/m²) | 600 | 600 | 600 | 700 | 800 | 800 | 700 |
| กำลังสูงสุด (วัตต์/ตร.ม.) | 300 | 300 | 330 | 300 | 300 | 330 | 300 |
| กำลังเฉลี่ย (วัตต์/ตร.ม.) | 100 | 100 | 110 | 100 | 100 | 110 | 100 |
Flip-Chip COB Specifications
| Specification | P1.25 | P1.53 | P1.86 |
|---|---|---|---|
| รุ่น | EA640F3-P1.25-COB | EA640F3-P1.53-COB | EA640F3-P1.86-COB |
| แพคเกจ LED | COB แบบฟลิปชิป | COB แบบฟลิปชิป | COB แบบฟลิปชิป |
| ความหนาแน่นของพิกเซล (พิกเซล/ตร.ม.) | 640,000 | 422,500 | 288,906 |
| ความละเอียดของโมดูล (พิกเซล) | 256 128 × | 208 104 × | 172 86 × |
| อัตราส่วนการสแกน | 1/64 | 1/52 | 1/43 |
| Cabinet size (W × H × D) | 640 480 ×× 60 มิลลิเมตร | 640 480 ×× 60 มิลลิเมตร | 640 480 ×× 60 มิลลิเมตร |
| Module size (W × H) | 320 × 160 มม | 320 × 160 มม | 320 × 160 มม |
| น้ำหนักคณะรัฐมนตรี | 7.3 กก. (ปอนด์ 16.1) | 7.3 กก. (ปอนด์ 16.1) | 7.3 กก. (ปอนด์ 16.1) |
| มุมมอง | ° 140 | ° 140 | ° 140 |
| เฉดสีเทา | บิต 14 | บิต 14 | บิต 14 |
| เพาเวอร์อินพุต | ไฟฟ้ากระแสสลับ 100–240 โวลต์, 50–60 เฮิรตซ์ | ไฟฟ้ากระแสสลับ 100–240 โวลต์, 50–60 เฮิรตซ์ | ไฟฟ้ากระแสสลับ 100–240 โวลต์, 50–60 เฮิรตซ์ |
| ความถี่ของเฟรม | ≥60เฮิรตซ์ | ≥60เฮิรตซ์ | ≥60เฮิรตซ์ |
| รีเฟรชความถี่ | ≥3,840เฮิรตซ์ | ≥3,840เฮิรตซ์ | ≥3,840เฮิรตซ์ |
| อุณหภูมิในการทำงาน | -20 ถึง +60 °C | -20 ถึง +60 °C | -20 ถึง +60 °C |
| ระดับการป้องกัน | IP31 | IP31 | IP31 |
| ความสว่าง (cd/m²) | 600 | 600 | 600 |
| กำลังสูงสุด (วัตต์/ตร.ม.) | 300 | 280 | 230 |
| กำลังเฉลี่ย (วัตต์/ตร.ม.) | 100 | 95 | 80 |
คำถามที่พบบ่อยเกี่ยวกับจอแสดงผล LED ภายในอาคาร EA640F3
1. What size and weight is an EA640F3 cabinet?
One EA640F3 indoor LED display cabinet is 640 × 480 × 60 mm and weighs 7.3 kg (16.1 lb). The cabinet measures 4:3 when installed in its standard landscape orientation.
2. Which pixel pitch should I specify for small text?
Start with the closest viewer, the smallest text and the required native resolution. Ask for a test using your own dashboards, slides or captions at the proposed pitch. P1.25 gives the most pixels per square meter of the listed configurations.
3. How do I get a 16:9 wall from 4:3 cabinets?
Use four cabinets across for every three cabinets high. A 4 × 3 grid gives a 2,560 × 1,440 mm active area. A larger 8 × 6 grid produces a 5,120 × 2,880 mm active area at the same aspect ratio. Confirm the available width and height before finalizing the grid.
4. What should I order as service spares?
ถาม EagerLED to quote matching LED modules, power supplies and receiving cards with the wall. Confirm the module batch, controller configuration and the correct vacuum service tool for the selected SMD or COB option.
5. How should I estimate electrical load?
Multiply the active display area by the maximum power per square meter in the specification table, then allow separately for the controller and other equipment. A 2,560 × 1,440 mm P1.25 wall at 300 W/m² is about 1.11 kW at the listed maximum before those allowances. Have the installer confirm the circuits and protection.
6. Can the display be installed outdoors?
The EA640F3 is rated IP31 and intended for fixed indoor environments. Specify appropriate environmental protection for locations exposed to rain, washdown, condensation or unusual amounts of dust.
Request a Quote for Your Indoor LED Video Wall
Share the active wall dimensions, closest viewing distance, content type, mounting location and installation city. If you already have a cabinet layout, pixel pitch or processor in mind, include it so EagerLED can confirm the configuration and quote the right equipment. You can also ติดต่อ Sun Legal EagerLED for project pricing.






















































