Perimeter LED board cost starts with the cabinet count that fits each approved pitch-side run, not the stadium’s total boundary length. Break the layout at gates, corners and service routes, then price the selected cabinets, controls, distribution, protective features and delivery as separate items. Combining disconnected runs into one length can produce an unusable quantity.
This guide is for stadium operators comparing a purchase for soccer perimeter advertising in the United States or Canada. It uses the published EA960SP5 cabinet dimensions for a worked layout example. The dimensions below are assumptions for purchasing arithmetic, not a venue design, safety approval or EagerLED project quotation.
In this guide
Calculate perimeter LED board cost by separate runs
Have the responsible venue team approve a drawing showing active advertising runs, gates, player and staff routes, camera positions and the working space behind the boards. Measure the usable length of each run separately. Keep cabinet supports and cables within the approved installation envelope, including when a service cover is open.
A gate opening is not saleable LED area. It is also not automatically a space where the installer can place spare cabinets, a cable bundle or a control enclosure. Mark these exclusions on the same drawing used for the quotation. If the layout changes for other sports or events, obtain a separate quantity schedule for that arrangement.
The EA960SP5 product page, checked on October 22, 2026, lists 960 × 960 mm cabinets, 28 kg cabinet weight, adjustable rear supports and rear service access. Use the 0.96 m cabinet width to calculate a straight run. Confirm joints, end treatments, corners and installation tolerances in the released drawing.

Worked example: three runs with fixed end points
Assume three separate straight runs, each with a maximum usable length of 25.0 m, and one cabinet in height. Cabinet width is 0.96 m. No cabinet may extend into the excluded opening at either end. This is a maximum-fit problem, so round down within each run instead of rounding the combined length up.
| Quantity | Calculation | Result |
|---|---|---|
| Cabinets per straight run | Floor of 25.0 ÷ 0.96 | 26 |
| Active length per run | 26 × 0.96 m | 24.96 m |
| Unfilled nominal length per run | 25.0 − 24.96 m | 0.04 m before allowances |
| Total active cabinets | 3 × 26 | 78 |
| Total active screen area | 78 × 0.96 × 0.96 m² | 71.8848 m² |
| Cabinet-only weight reference | 78 × 28 kg | 2,184 kg |
The 40 mm remainder in each run is arithmetic, not an approved construction clearance. Real tolerances, end pieces and support details may reduce the permitted count. The weight total excludes cases, cables, external equipment and anything not included in the published cabinet figure; it is not a packed shipping weight or a floor-loading approval.
Combining the three lengths gives 75 m. Rounding 75 ÷ 0.96 upward yields 79 cabinets, but that does not identify where the extra cabinet can fit. Conversely, a requirement for at least 25 m of active coverage would need 27 cabinets and 25.92 m of nominal length per run. That requirement conflicts with the assumed maximum space and needs a revised layout.
This distinction makes perimeter LED board cost more useful to the buyer: quote active cabinets from the approved run schedule, then show compatible spares separately. Do not price spare stock as additional installed advertising area.
Make both P5 quotations describe the same hardware
The EA960SP5 table contains two P5 columns with the same 960 mm cabinet format and 64 × 32 pixel module resolution, but different LED packages and published power and brightness figures. A proposal that says only “P5 stadium screen” leaves a material comparison unresolved.
| Parameter | P5 SMD1921 | P5 SMD2727 |
|---|---|---|
| Brightness | 5,500 cd/m² | 6,000 cd/m² |
| Maximum power | 550 W/m² | 650 W/m² |
| Average power | 185 W/m² | 220 W/m² |
| Protection grade | IP65 front / IP54 rear | IP65 front / IP54 rear |
Published averages support a provisional operating-cost estimate; the electrical design must use confirmed maximum input and installation requirements. For the example’s 71.8848 m², the two listed average figures correspond to approximately 13.30 kW and 15.81 kW. Actual use depends on content, brightness and operating conditions. These calculations do not establish an energy-saving guarantee or a price difference.
When comparing perimeter LED board cost, retain the LED package, driving configuration, processor and spare identities beside the price. Do not combine one column’s brightness with another column’s lower power figure. For perimeter LED board cost comparisons, confirm current production specifications in the order documents.
Price protection, access and distribution as real scope
The model page describes a soft top cushion and flexible LED mask. Ask which protective parts are included, how they attach and how damaged parts are replaced. These features do not establish that the installation satisfies every competition, governing-body or venue requirement. Obtain the applicable acceptance criteria for the actual event and venue.

Perimeter LED board cost also includes the cable and distribution arrangement between runs. State which power and signal components are supplied, where the control equipment sits, how cables cross approved routes and who performs local electrical work. A cabinet’s ingress rating does not rate every external connection or validate an improvised cable crossing.
Rear-service access is a space requirement with a budget consequence. Request a demonstration of cover opening and component removal in the proposed support position. Keep the working route available during the event rather than assuming technicians can enter the playing area. The stadium LED display guide covers the broader sightline and operating questions.

Separate installed quantity from shipped inventory
For perimeter LED board cost, ask for an inventory list containing installed cabinets, agreed spare modules and electronics, protective spare parts, cables, cases and documentation. Specify the destination city and delivery responsibility. Request gross weights and case dimensions rather than estimating freight from the cabinet-only weight.
Agree how the supplier will number runs and cabinets before packing, and how that numbering matches the connection map. A receiving team should be able to reconcile the delivery with the order without assembling the entire boundary. Retain the packing list and configuration records for later reconfiguration or repairs.
Watch the official @EagerLED P8 perimeter-screen demonstration to see a 960 × 960 mm cabinet system assembled into a long advertising surface. It is a separate Italy project reference, not proof of the EA960SP5 configuration or the assumed three-run quantities in this article.
Frequently asked questions
Should I order one extra cabinet to fill a small gap?
Only if the approved layout has room for its full installed width and support arrangement. A small remainder does not justify extending into an excluded route. Resolve fit before converting a spare into installed hardware.
Can a corner use the same straight-run arithmetic?
Obtain the actual corner drawing and connection details. A direction change can affect end positions, supports, sightlines and cable routing, so do not treat it as an uninterrupted straight length without confirmation.
Does the cabinet weight establish the transport cost?
No. Shipping requires the packed gross weight, case dimensions, handling services and delivery destination. The cabinet-only sum is a reference for inventory, not a carrier quotation.
Should spare parts be counted in the installed screen area?
No. Keep installed advertising area and spare inventory as separate quote lines. Match spare part numbers and revisions to the ordered system and agree storage and replacement procedures.
Does the published refresh rate prove broadcast acceptance?
No. Test the actual cameras, shutter settings, operating brightness and sponsor content under representative conditions. A specification figure is an input to that test, not its result.
Request a run-by-run perimeter quotation
Provide the approved run lengths, excluded openings, support and rear-access envelope, country, destination city and advertising workflow. Ask for perimeter LED board cost to separate active cabinets, spares, processing, distribution, packing, freight and local work. Send the venue layout and request a comparable quotation





































