EagerLED’s outdoor curved GOB LED rental screen (EA500C3 series) is a 500×500 mm die-cast aluminium rental cabinet protected by a GOB (Glue on Board) module. A high-precision arc lock splices every cabinet into inner or outer curves, IP65 outdoor protection and GOB encapsulation keep the screen working through rain, dust and the knocks of repeated load-in and load-out, and dual quick locks let a crew build and strike the wall fast. Available in P1.95, P2.604, P2.976 and P3.91 pixel pitches for indoor stages, outdoor concerts, festivals, sports events and exhibitions.
Key takeaways
- GOB protection: a clear resin layer is glued over the LED surface to resist impact, moisture and dust.
- Curved and flat: high-precision arc locks build inner (concave) and outer (convex) arcs, and the same cabinets splice flat when the layout changes.
- Fast to build: two quick locks per cabinet plus front-service access shorten assembly and maintenance time.
- Outdoor ready: IP65 dustproof and waterproof cabinet with a fanless heat-dissipation structure.
- Pitch options: P1.95 – P3.91 to match viewing distance, indoor or outdoor use, and budget.
What is a GOB LED rental screen?
GOB stands for Glue on Board. During module production a specialised liquid resin is poured evenly across the module surface and cured into a clear protective seal. Instead of leaving LED chips and solder joints exposed to the air, GOB covers them – adding impact, moisture and dust protection without blocking light, colour or brightness.
That protection is what makes GOB a natural fit for rental. A touring screen is assembled, transported and struck dozens of times a year, and every handling cycle is a chance to damage an exposed LED. EagerLED’s GOB LED display module is built for ultra moisture-proof, waterproof and anti-collision protection, with module-level IP68 waterproof performance – useful in humid climates, at coastal venues and on outdoor shows. See also the advantages of GOB LED display modules and COB vs GOB.
GOB vs standard SMD on a rental screen
| Aspect | Standard SMD cabinet | GOB cabinet (EA500C3) |
|---|---|---|
| LED surface | LED chips and solder joints exposed to the air | Sealed under a cured, transparent resin layer |
| Impact and knocks | Chips can be knocked off during transport and rigging | Resin layer absorbs knocks and protects the pixels |
| Moisture, rain and dust | Moisture can reach the LED and PCB | Waterproof, dust-proof seal at module level (IP68 module protection) |
| Cleaning | Careful cleaning needed around exposed LEDs | Wipeable surface, easier to clean between shows |
| Dead pixels and repairs | Higher risk after repeated handling | Designed to reduce damage and module replacements |
| Best fit | Fixed indoor installations with low handling | Touring, outdoor events and high-handling rental fleets |
If you are choosing between packaging technologies for a fixed installation, read COB vs GOB in LED display. For touring and outdoor work the deciding factor is usually how much handling damage the screen can absorb between shows.
Curved splicing: inner and outer arcs with a high-precision arc lock
Curved stages, corners and 360-degree set designs need cabinets that lock together at an angle and hold that angle all night. The EA500C3 uses a high-precision arc lock: compared with older arc locks, rotation control is more accurate and easier to operate, so a crew can dial the curve in quickly and repeat the same angle across a whole wall.
Both inner (concave) and outer (convex) curves are supported, and the same cabinets can be spliced flat when the layout changes. Each cabinet also carries two quick locks on the left and right sides for faster assembly and better screen flatness, plus bumper feet at the bottom of the cabinet that protect the edge of the LED module during transport and stacking.
For a step-by-step walkthrough, watch the EA500C3 inner and outer arc installation tutorial. Larger curves are often built with 500×1000 mm cabinets – 960 pieces of P3.9 outdoor EA500C3 curved screens were produced for one Congo project, and the same series has been used for curved rental splicing.
Key features of the EA500C3 outdoor curved GOB rental screen
- GOB (Glue on Board) module: waterproof, moisture-proof and anti-collision protection for the LEDs, with module-level IP68 protection.
- 500×500 mm die-cast aluminium cabinet: sturdy, corrosion-resistant and built for repeated transport.
- High-precision arc lock: fast, accurate inner and outer arc adjustment, also usable flat.
- Dual quick locks: two locks per cabinet for faster assembly and better screen flatness.
- Bumper feet: protect the module edge when cabinets are stacked and moved.
- Front service: modules and components are accessible from the front, so maintenance does not need rear space.
- IP65 outdoor protection: dustproof and waterproof cabinet for outdoor stages and events.
- Fanless heat dissipation: silent operation that suits noise-sensitive shows and broadcast work.
- Camera-friendly image: high refresh rate and high grey scale for flicker-free shooting and on-screen broadcast close-ups.
Specifications
| Product type | Outdoor curved GOB rental LED screen |
| Series | EA500C3 (500×500 mm); 500×1000 mm cabinets available in the EA1000C3 series |
| Pixel pitch | P1.95 / P2.604 / P2.976 / P3.91 |
| LED protection | GOB (Glue on Board) encapsulation – waterproof, anti-collision, module-level IP68 protection |
| Cabinet protection | IP65 dustproof and waterproof |
| Cabinet material | Die-cast aluminium, corrosion resistant |
| Curvature | Inner and outer arc via high-precision arc lock; flat splicing supported |
| Locking system | Two quick locks per cabinet (left and right) |
| Service access | Front service |
| Cooling | Fanless heat-dissipation structure |
| Typical use | Concerts, festivals, sports events, exhibitions, corporate events, church events |
Specifications can be customised for your project. Contact EagerLED for the current datasheet, cabinet drawings and price.
Where this screen fits
- Touring concerts and festivals: fast builds, curved stage shapes and GOB protection for cabinets that travel every week.
- Sports events and fan zones: IP65 weather protection and a quiet, fanless cabinet.
- Exhibitions and trade shows: curved booth walls with front-service maintenance.
- Corporate events and product launches: clean, flat screens indoors and outdoors.
- Churches and community events: reliable operation for weekly services and special events.
- Rental houses and AV integrators: one cabinet type for curved and flat builds, with maintenance designed to be quick.
Project experience with the curved GOB rental screen
EagerLED has delivered curved rental LED screens for concerts, festivals and outdoor events worldwide. Two recent examples:
- 960 pieces of P3.9 outdoor EA500C3 rental curved LED screens sent to Congo.
- P3.91 EA500C3 rental LED displays for the Maajabu Gospel concert in Kinshasa, DRC.
Inside the module, GOB encapsulation is what survives the tour:
Why buy this rental screen from EagerLED
- 15 years in LED display manufacturing: EagerLED produces indoor and outdoor rental LED screens, LED video walls and customised LED display solutions.
- Factory direct supply: cabinet quantity, pixel pitch, cabinet size and rigging accessories are configured for your project.
- Free pre-sales advice: tell us your stage size and viewing distance and we will recommend the pitch, cabinet layout and screen resolution.
- Installation support: assembly tutorials for flat, inner-arc and outer-arc builds, plus technical support through the project.
- After-sales service: spare modules, power and data components and technical help after delivery.
FAQ: outdoor curved GOB LED rental screens
What does GOB mean in an LED display?
GOB stands for Glue on Board. A transparent liquid resin is poured evenly over the module surface and cured, so the LED chips and solder joints are sealed under a protective layer. On a rental screen this layer resists impact, moisture and dust.
Is a GOB screen better than SMD for rental events?
For screens that are handled often, shipped between venues or used outdoors, GOB adds protection at the LED surface, which is where most transport damage happens. Standard SMD screens remain a cost-effective choice for fixed indoor installations where handling is limited.
Can the EA500C3 be built into a curved shape?
Yes. The high-precision arc lock adjusts each cabinet connection so the wall can follow an inner (concave) or outer (convex) curve, and the same cabinets can be spliced flat. This is how curved stage backdrops and corner screens are built.
Can this screen be used outdoors in rain and dust?
The outdoor cabinet carries an IP65 dustproof and waterproof rating, and the GOB module seals the LEDs with waterproof, anti-collision protection at module level. That combination is designed for outdoor events and humid or coastal venues.
Which pixel pitch should I choose?
P1.95 suits close viewing distances and studio or indoor stages, P2.604 and P2.976 fit mid-range indoor and outdoor stages, and P3.91 is the usual choice for large outdoor screens viewed from several metres away.
How fast can the screen be assembled?
Two quick locks on each cabinet speed up assembly and improve flatness, and front service means modules can be replaced without access to the rear of the screen. EagerLED provides an EA500C3 installation tutorial for inner and outer arc builds.
Get a quote for your next event
Send us your stage width and height, viewing distance, indoor or outdoor use, and event dates. EagerLED will recommend the pixel pitch, cabinet quantity, resolution and rigging accessories for your project – and quote factory-direct pricing.
Contact EagerLED for a quote for the outdoor curved GOB LED rental screen.
