The NovaStar VX600 Pro is a six-port all-in-one controller for professional LED video walls. This updated guide shows AV integrators how to check pixel load, design port and source routing, configure layers, and commission an LED wall using the current product specification. NovaStar also writes its brand name as “Novastar” or “Nova Star”; all three refer to the same LED display control equipment.
Quick answer: The NovaStar VX600 Pro is an all-in-one 4K LED display controller with 6 Gigabit Ethernet ports, a 3.9-million-pixel loading capacity, a maximum output width of 10,240 pixels and a maximum height of 8,192 pixels, and 6× 2K×1K layer resources. It combines video processing, input switching, layer compositing and output management in a single rack-mount chassis, and it can be controlled from the front panel, NovaLCT, the Unico web page or the VICP app.
Contents
1. NovaStar VX600 Pro overview and specifications
2. Key features of the NovaStar VX600 Pro
3. Getting started: VX600 Pro setup steps
4. Creating and managing layers on the VX600 Pro
5. Configuring screen resolution and physical layout
6. Using multiple input sources in one display layout
7. NovaStar VX600 Pro manual, firmware and 2026 changes
8. VX600 Pro vs VX400 Pro, VX1000 Pro and VX2000 Pro
9. NovaStar VX600 Pro FAQs
10. Get a Verified VX600 Pro Configuration
1. NovaStar VX600 Pro overview and specifications
Novastar VX600 Pro is a true all in one controller: it integrates video processing, input switching, layer compositing and output management into a single industrial chassis, which can simplify a suitable signal chain; a redundant show still requires a separately engineered backup path. Whether you are deploying a fixed installation or managing a touring show, the VX600 Pro offers several modes and configuration tools that should be tested with the actual cabinets and sources. NovaStar positions it for medium and high-end rental, stage control systems and fine-pitch LED screens.
VX600 Pro specifications at a glance:
| Specification | VX600 Pro |
| Product type | All-in-one LED display controller combining video processing and video control |
| Loading capacity | 3.9 million pixels |
| Maximum output size | 10,240 pixels wide × 8,192 pixels high |
| Ethernet output ports | 6× Gigabit Ethernet, 650,000 pixels per port (8-bit input) |
| Layer resources | 6× 2K×1K. A 4K×2K layer uses 4 resources, a 4K×1K layer uses 2 and a 2K×1K layer uses 1 |
| Working modes | Video controller, fiber converter and ByPass |
| Video inputs | 1× HDMI 2.0 (IN & LOOP), 2× HDMI 1.3, 1× 3G-SDI (IN & LOOP), 1× 10G optical fiber (OPT 1, self-adaptive input or output), 1× USB 3.0 media playback |
| Maximum input resolution | 4096×2160@60Hz over HDMI 2.0; 1920×1080@60Hz over HDMI 1.3 and 3G-SDI |
| HDCP | HDCP 1.4 and HDCP 2.2 over HDMI 2.0; HDCP 1.4 over HDMI 1.3 |
| Video outputs | 6× Gigabit Ethernet; 2× 10G optical fiber (OPT 1 output, OPT 2 copy, backup or loop output); 1× HDMI 1.3 monitoring output at 1920×1080@60Hz; 1× 3D connector |
| Fiber transmission distance | Up to 10 km with a single-mode twin-core module, up to 300 m with a multi-mode twin-core module (optical module optional) |
| Audio | 1× 3.5 mm audio input and 1× 3.5 mm audio output, sampling rate up to 48 kHz; audio accompanied with HDMI sources; adjustable output volume |
| Control | Front panel LCD with knob, NovaLCT, Unico web page and VICP app; 2× Ethernet for Unico control and cascading; 1× USB 2.0 for firmware, logs and EDID; 1× RS232; 1× Genlock IN/LOOP; 1× light sensor |
| Presets | Up to 256 user-defined presets with one-button loading and layout preview |
| Latency | 1–2 frames in video controller mode with low latency enabled (2–3 frames without); 0 frames in ByPass only with low latency enabled, and 0 frames in fiber converter mode |
| USB playback | Single-partition drive, NTFS / FAT32 / exFAT; jpg, jpeg, png and bmp images; mp4 video with H.264 up to 3840×2160@30fps or H.265 up to 3840×2160@60fps; AAC-LC audio |
| Backup and reliability | End-to-end backup between devices, input sources, Ethernet ports and OPT/Ethernet ports; Ethernet port backup testing; saved settings restored automatically after a power failure |
| Power | 100–240 V~, 50/60 Hz; rated power consumption 41 W |
| Operating environment | 0 °C to 50 °C, 5% to 85% RH non-condensing |
| Dimensions | 482.6 × 302.2 × 50.1 mm |
| Weight | 3.9 kg net weight, 6.5 kg total weight |
| Certifications | CE, FCC, IC, RCM, EAC, UL, CB, KC, RoHS |
Source: NovaStar VX600 Pro All-in-One Controller Specifications, document version V1.4.0, released 30 July 2026. Where a feature depends on third-party hardware — such as specific receiving cards, 3D glasses or optical modules — the condition is stated in the specification.




Specify the NovaStar VX600 Pro from a cabinet schedule rather than from the headline input format. Multiply each cabinet’s pixel width and height by its quantity, then assign those cabinets to actual Ethernet chains. Keep a drawing of the entire canvas and every port load.
2. Key features of the NovaStar VX600 Pro
The VX600 Pro stands out as a powerful all in one controller, integrating advanced features that suit both first-time users and seasoned professionals. Below we break down its core capabilities.

01. Video input and output capabilities
The VX600 Pro accepts multiple video inputs — HDMI 2.0, HDMI 1.3, 3G-SDI, 10G optical fiber and USB 3.0 media playback — and processes them through the same internal pipeline. The self-adaptive OPT 1 port can serve as either an input or an output connector depending on what you plug into it, which removes the need for a separate fiber converter in most signal chains.
Key highlights:
- HDMI 2.0: up to 4096×2160@60Hz, with 8-, 10- and 12-bit input, RGB 4:4:4 / YCbCr 4:4:4 / YCbCr 4:2:2 sampling, HDCP 1.4 and HDCP 2.2, and HDMI 2.0-1 loop out.
- HDMI 1.3 (×2): up to 1920×1080@60Hz with HDCP 1.4, ideal for laptops, media players and confidence monitors.
- 3G-SDI: up to 1920×1080@60Hz with deinterlacing and loop output, for broadcast cameras and production routers.
- 10G optical fiber: transmits the output of Ethernet ports 1–6 up to 10 km on a single-mode twin-core module, or copies and backs up that output.
- USB 3.0: instant playback of images and video straight from a USB drive, with no PC attached.
02. Layer management features
Layer capacity is measured in 2K×1K layer resources, and the VX600 Pro provides 6 of them. You can create layers in three specifications — 4K×2K (4 resources), 4K×1K (2 resources) and 2K×1K (1 resource) — so a single 4K layer plus two 2K layers, or six 2K layers, both fit inside the same budget. Each layer’s size, position, priority and aspect ratio can be adjusted independently.
Key features include:
- 6× 2K×1K layer resources: build picture-in-picture, split-screen and multi-camera layouts in real time.
- Free input cropping: trim black borders or isolate one region of a source.
- Image scaling modes: full screen, pixel to pixel and custom.
- Text and image elements: add text, image, weather and time elements across the VX Pro series, with customisable settings.
03. Video processing, color and calibration
The VX600 Pro uses SuperView III image quality processing with stepless output scaling and one-click full screen display. Output color management covers brightness, saturation, contrast and hue, and brightness and chroma can be calibrated at pixel level when the device is used together with NovaLCT and NovaStar calibration software. That calibration step is what removes color discrepancies between cabinets on a large fine-pitch wall.
04. Audio input and output functions
In addition to its video capabilities, the VX600 Pro provides comprehensive audio support:
- Accompanied audio: follows the HDMI source automatically.
- Independent audio: 3.5 mm audio input and output jacks for external mixers and consoles, with sampling rates up to 48 kHz.
- Volume control: output volume is adjustable from the device front panel.
05. Control options
There are four ways to operate the VX600 Pro, so you are not tied to a laptop on site:
- Front panel: LCD screen, rotary knob, layer buttons and shortcut keys (PRESET, TEST, FREEZE, FN).
- NovaLCT: the PC application for screen configuration, cabinet library, receiving card mapping, layer control and calibration.
- Unico web page: browser-based control over the device Ethernet control ports.
- VICP app: mobile control and monitoring.
Hold the knob and the BACK button together for three seconds or longer to lock or unlock the front panel buttons — useful when a device is installed in a public or accessible position.
3. Getting started: VX600 Pro setup steps
Setting up the VX600 Pro involves connecting the necessary cables, configuring basic settings through the front panel or NovaLCT, and ensuring proper communication between the controller and the LED screen.
01. Initial steps
- Mount the device: the VX600 Pro is a 482.6 × 302.2 × 50.1 mm unit with a 3.9 kg net weight. It must be placed horizontally — do not mount it vertically or upside down. If you rack-mount it, use at least eight M5×8 screws and make sure the rack can carry at least 15 kg.
- Connect power: use the supplied power cord with a 100–240 V~, 50/60 Hz supply. Rated consumption is 41 W.
- Attach input sources: plug in HDMI, SDI or fiber optic cables based on your project requirements.
- Link Ethernet ports: connect the six Gigabit Ethernet ports to the corresponding LED cabinets through your receiving cards.
- Power on: press the power button and wait for the system to initialise. Previously saved settings are restored automatically after a power failure.
Once powered on, use the front panel knob to navigate the LCD menu and configure essential parameters such as brightness, input source and EDID settings. For multi-layer work, connect a control PC to one of the Ethernet control ports and continue in NovaLCT.
4. Creating and managing layers on the VX600 Pro
Layer management is one of the strengths of the Novastar VX600 Pro as a professional video wall controller. With 6× 2K×1K layer resources it enables dynamic compositions such as picture-in-picture, live score overlays or multi-camera monitoring, all processed in real time inside this all in one controller.
You can create and adjust layers using NovaLCT (NovaStar’s PC software), the front-panel LCD menu, the Unico web interface or the VICP app. The following steps walk you through the essential workflow.
01. Access layer settings
Start by entering the layer management section. In NovaLCT, go to the Screen tab, select Layer Management and click Add Layer. If you are working directly on the device, rotate the front-panel knob to navigate to System Settings > Layer Settings and choose Add Layer, or press one of the LAYER 1–3 buttons on the front panel. Each new layer must be linked to an active input source — such as HDMI 1, SDI or internal USB playback.

02. Configure layer properties
Once a layer is created, define its visual behavior. Assign the input source, then adjust its size and on-screen position using X/Y coordinates or drag-and-drop in NovaLCT. Set the layer’s priority (Z-order) to control which content appears on top — critical when overlapping graphics and video. Choose a scaling mode: Full Screen stretches the source, Pixel-to-Pixel preserves the original resolution, and Custom lets you fine-tune the aspect ratio without distortion.
03. Fine-tune display and source details
Enhance visual quality with per-layer color adjustments — brightness, contrast, saturation and hue — to match other layers or correct source inconsistencies. Use the input crop function to trim black borders or zoom into a specific region of the source, for example isolating a presenter from a wide shot. Text and image elements such as event names or channel IDs can be placed over any layer through the preset and element controls.
Keep in mind that the VX600 Pro allocates layer resources by resolution: a 4K×2K layer consumes four of the six 2K×1K resources, a 4K×1K layer consumes two and a 2K×1K layer consumes one. Plan your layout to stay within the budget and avoid resource warnings.
04. Example workflow
| Action | Description |
| Add layer | Create a layer and assign an input source such as HDMI 2.0, SDI or USB. |
| Set priority | Higher priority layers appear above lower ones — adjust for layered visuals. |
| Set scaling | Full screen, pixel to pixel or custom, depending on how the source should fill the layer. |
| Save a preset | Store the layout in one of the 256 presets so the whole scene can be recalled with one button. |
When designing a show on the NovaStar VX600 Pro, draw every simultaneous layer at its intended size. The six resource units are a processing budget; the physical LED load is a separate output budget. Both checks must pass.
5. Configuring screen resolution and physical layout
Correctly setting your screen’s resolution and physical layout is essential for the VX600 Pro to display content across the full LED wall. This configuration is done in NovaLCT, NovaStar’s official control software.
Remember the loading limits while you plan: 3.9 million pixels in total, a maximum output width of 10,240 pixels, a maximum height of 8,192 pixels and 650,000 pixels per Ethernet port at 8-bit input. For irregular layouts, the current specification distinguishes free topology, which calculates Ethernet-port loading from the actual cabinets, from non-free topology, which uses the maximum circumscribed rectangle. Free topology requires specific receiving cards. Confirm the card model and selected mode before promising a higher usable port load.
01. Define your cabinet type
Open NovaLCT and go to Screen > Cabinet Library. Click Add to create a new cabinet model. Enter:
- Cabinet width and height in pixels (for example 256 × 256).
- Scan type (for example 1/8 or 1/16 — check your receiving card specifications).
- Save the cabinet. You only need to do this once per cabinet type.
02. Set total screen size
In Screen Configuration, select the cabinet you just created. Then enter:
- Cabinet row quantity: the number of cabinets stacked vertically.
- Cabinet column quantity: the number of cabinets placed horizontally.
The software calculates the total screen resolution automatically (for example, 10 cabinets × 256 px = 2560 px wide).
03. Assign the starting port and direction
Under Quick Configuration, set:
- Starting port: usually Port 1 (it must match your physical first connection).
- Data flow (front view): choose the direction that matches your cabling — typically left to right, top to bottom.
If your screen starts from a different corner, for example bottom-left, adjust accordingly. A wrong setting causes the image to appear flipped or offset.
04. Preview and verify
Click Preview to see a simulated output, then press Send to apply the layout to the VX600 Pro through NovaLCT. If your receiving cards support it, use Mapping mode to light up each cabinet with its logical ID — this confirms your software layout matches the physical wiring. The device also includes an Ethernet port backup test that checks pre-stored images, backup Ethernet ports and backup devices without unplugging any cables.
Once complete, any input source scales correctly across the entire screen. Do this step before layer management, because layers and advanced effects only display correctly on a correctly configured screen.
For an irregular wall on the NovaStar VX600 Pro, ask whether the chosen receiving cards support free topology. If they do not, plan against the non-free bounding rectangle and confirm each of the six port loads before shipping the cabinets.
6. Using multiple input sources in one display layout
Novastar VX600 Pro lets you combine up to six input sources — HDMI cameras, SDI feeds, USB media players, computers or fiber signals — into a single cohesive display using its layer system. A separate switcher or scaler may still be necessary when the planned source count, switching workflow or processing needs exceed the controller configuration.
01. Connect all input sources
Plug your devices into the available ports:
- HDMI 2.0: for 4K computers, media servers and cameras (up to 4096×2160@60Hz).
- HDMI 1.3 (×2): for laptops, media players and confidence monitors.
- 3G-SDI: for broadcast cameras and professional video routers.
- OPT (optical fiber): for long-distance transmission, or to copy and back up the output.
- USB 3.0 playback: load mp4 video or images directly from a USB drive.
Ensure each source is powered on and outputting a valid signal before proceeding.

02. Create a layer for each source
In NovaLCT, go to Screen > Layer Management and click Add Layer for each input:
- Set Source to the corresponding port (for example HDMI 1, SDI or USB).
- Adjust Position and Size to place the window where you want it.
- Set Priority (Z-order) so important content stays on top.
You can mix resolutions — for example a 4K HDMI feed as the background with a 1080p SDI camera in a picture-in-picture window. Remember the resource cost: that combination uses 4 + 1 = 5 of the six 2K×1K layer resources.
03. Optimize scaling and crop
For each layer, choose a scaling mode:
- Full screen: scales the source to fill the layer area.
- Pixel to pixel: keeps the original resolution and adds black bars where needed.
- Custom: manually adjust scale, offset and aspect ratio.
Use Input Crop to zoom into a region of interest, such as cropping a 4K desktop to show only a specific application window.
04. Manage audio (if needed)
Only one audio source can be output at a time. In System Settings > Audio, select:
- Accompanied audio: follows the currently active HDMI layer.
- Independent audio: use the 3.5 mm input for external mixers and consoles.
Output volume can be adjusted from the front panel.
Tip: if the picture behaves unexpectedly, check the function limitations in the specification first. 3D mode and input crop are mutually exclusive, low latency requires that all cabinets loaded by Ethernet ports are aligned at the top of the circumscribed rectangle, and in ByPass mode the video processing function is unavailable. Also make sure total capacity stays inside 3.9 million pixels.
Save a simple fallback scene on the NovaStar VX600 Pro with one known-good input. During acceptance, disconnect each primary source in turn and confirm the designed backup behavior; a feature list is not proof that the installed backup path works.
7. NovaStar VX600 Pro manual, firmware and 2026 changes
Document check, November 2026: The NovaStar VX600 Pro All-in-One Controller Specifications V1.4.0, dated 30 July 2026, supersedes the V1.0.1 file cited by the earlier version of this article. NovaStar’s VX Pro Series User Manual V1.4.2 and VX600 Pro firmware V1.4.1 are listed on its current product page. Verify the actual hardware and installed firmware before following a menu sequence or importing another show’s settings.
For the NovaStar VX600 Pro, the revision adds a practical distinction between free and non-free topology. Free topology calculates port load from the cabinets actually connected, but it requires specific receiving cards. Non-free topology calculates the maximum bounding rectangle. Request the receiving-card part number and test the screen map in software before using an irregular-canvas capacity estimate in a quote.
The specification also describes up to five configuration restore points with a combined 1 GB limit. A restore point can recover a saved configuration after a mistaken edit; it does not replace a second device, a spare source, or backup cabling. The NovaStar VX600 Pro offers backup relationships for devices, sources, Ethernet ports, optical and Ethernet paths, and dual receiving cards, but each path has to be built, configured and tested.
For a camera-facing wall, the NovaStar VX600 Pro can reduce device delay to zero frames when low latency and ByPass are enabled together. Video Controller mode retains processing and layer functions but has different latency. ByPass disables video processing, so a design that needs scaling or multiple composited layers cannot simply assume the zero-frame figure. Measure the complete camera-to-screen path in the intended mode.
Use the quick start guide for connector identification, the V1.4.0 specification for limits and mode restrictions, and the V1.4.2 user manual for current menu steps. Obtain firmware through the manufacturer’s official distribution for the specific unit. EagerLED’s NovaStar control software page explains the tools used for screen setup; keep a copy of the tested configuration before any update.
8. VX600 Pro vs VX400 Pro, VX1000 Pro and VX2000 Pro
NovaStar’s VX Pro series is offered in 4-port, 6-port, 10-port and 20-port configurations, and the VX600 Pro is the 6-port model. Every model in the series supports real 4K input at 4096×2160@60Hz over HDMI 2.0 and up to 256 presets, so the buying decision usually comes down to capacity and layer allocation.
| Model | Layer allocation (official) | Best fit |
| VX400 Pro | 6× 2K layers, or 1× 4K + 2× 2K layers | Smaller screens and lighter shows where 4 Ethernet ports are enough |
| VX600 Pro | 6× 2K layers, or 1× 4K + 2× 2K layers | Single 4K screens up to 3.9 million pixels; rental, stage and fine-pitch installs |
| VX1000 Pro | 6× 2K layers, or 1× 4K + 2× 2K layers | Larger screens that need more Ethernet ports and higher loading capacity |
| VX2000 Pro | 12× 2K, 6× DL, or 3× 4K layers | Multi-4K shows and complex multi-window productions |
In practical terms:
- Choose the VX600 Pro when one 4K screen or a small group of screens fits inside 3.9 million pixels, and you want video processing, fiber conversion and ByPass in a single box for a medium or high-end rental or stage rig.
- Step up to the VX1000 Pro when the wall outgrows 3.9 million pixels or you need more Ethernet ports to distribute the load.
- Step up to the VX2000 Pro when the production needs three 4K layers or twelve 2K layers at once.
- Comparing the smaller class? Our VX400 Pro vs VX400 breakdown covers the eight differences that actually matter.
If your requirement is only long-distance signal transport rather than full video processing, a dedicated fiber converter such as the CVT8-5GS is often the simpler answer. And if the job is multi-window video wall splicing rather than LED cabinet control, compare with the H9 video wall splicer. For whole-structure projects, our stage LED screen guide covers cabinet choice, rigging and pixel pitch.
Compare the NovaStar VX600 Pro with larger models using the complete port map, 10-bit needs and simultaneous layer scene. A higher total pixel rating alone cannot fix a missing connector, incompatible receiving card or insufficient optical route.
9. NovaStar VX600 Pro FAQs
These questions address the checks that usually delay a controller purchase or a live commissioning day.
01. What is the NovaStar VX600 Pro output limit?
The NovaStar VX600 Pro has six Gigabit Ethernet outputs and a device load limit of 3.9 million pixels. Its 10,240-pixel maximum width and 8,192-pixel maximum height are separate boundaries; neither increases the total pixel budget. Check each port and the exact cabinet map.
02. Does free topology work with every receiving card?
No. The V1.4.0 specification requires specific receiving cards for free topology. Confirm the receiving-card model before calculating load from actual cabinet shapes; non-free topology uses the bounding rectangle.
03. Can I combine a 4K layer with other layers?
Yes, within the six 2K × 1K layer resources. A 4K × 2K layer consumes four resources, leaving two for 2K × 1K layers. Test the actual source formats and the complete scene.
04. Is ByPass always zero latency?
No. The documented zero-frame device delay requires both ByPass mode and low latency. ByPass also removes video processing, and the camera, switcher, receiving cards and LED scan add their own delay.
05. How should I back up a live wall?
Draw and configure the primary and secondary source, device, port and optical paths required by the show. Use the Ethernet port backup test and simulate a failure before handover. A restore point is for configuration recovery, not live hardware redundancy.
06. Which document and firmware versions should I check?
The current NovaStar product page lists VX600 Pro Specifications V1.4.0, VX Pro Series User Manual V1.4.2 and VX600 Pro firmware V1.4.1. Confirm the installed device revision and obtain files from the manufacturer before upgrading.
07. Why is part of my wall blank?
Compare the cabinet pixel size, row and column count, starting Ethernet port, cable order and data direction with the software map. Run mapping and a test pattern; then check whether one port exceeds its permitted load.
08. Can a 4K input drive a native 4K LED canvas on one unit?
No. An accepted 4K video input can be scaled, but a 3840 × 2160 native LED canvas contains 8.29 million pixels and exceeds the 3.9-million-pixel output limit. Use a larger or multi-controller design.
10. Get a Verified VX600 Pro Configuration
You now have everything you need to specify, set up, layer and control multi-source content on a NovaStar VX600 Pro all-in-one controller — from confirming the 3.9-million-pixel capacity against your wall, through defining the screen layout in NovaLCT, to combining live cameras, playback files and computer feeds in a single display.
If you are setting up for the first time, start with a simple two-layer layout (for example a full-screen background plus a PIP camera) to test signal flow and scaling. Once that works reliably, expand to more complex designs, and save each working arrangement into a preset so the same show can be recalled with one button.
Planning a stage, rental or fine-pitch installation around the VX600 Pro? Ask EagerLED to check the LED wall and controller as a matched package, so cabinet loading, port distribution and controller capacity are checked before the hardware ships. Send us your screen size, pixel pitch and cabinet type and we will confirm the configuration.
Send EagerLED the cabinet pixel dimensions, screen layout, source formats and receiving-card model when asking about the NovaStar VX600 Pro. Those details let our engineers check capacity, topology and backup requirements against the actual project.




































