EA640F2 Indoor LED Display

The EA640F2 is built for fixed indoor installations such as meeting rooms, retail interiors, showrooms and exhibition walls where a slim cabinet and front maintenance matter. The same cabinet is offered in SMD and COB configurations, so it fits both close-viewing presentation walls and larger indoor LED display projects.

Pitch follows your closest viewing distance: P1.25 to P1.86 for close viewing in meeting rooms, and P2 to P4 where viewers sit further back. SMD options run from P1.25 to P4 and flip-chip COB is available at P1.25, P1.53 and P1.86. Send your screen size and seating distance and we will confirm the pixel density.

Yes. LED modules, power supplies and receiving cards are all accessible from the front, and magnetic modules can be removed individually with a vacuum tool. A wall can therefore be maintained from the room side, without rear access or a service corridor.

Cabinets are 640x480 mm with a 4:3 ratio, so a four-cabinet-wide, three-cabinet-high layout of twelve cabinets forms a 2560x1440 mm 16:9 wall. Other sizes and ratios are possible; final resolution depends on the pixel pitch you choose.

SMD is the usual choice for standard indoor viewing distances and offers the widest pitch range here, up to P4. Flip-chip COB gives a sealed, more robust surface that resists contact and cleaning, which suits high-traffic areas; it is offered at P1.25, P1.53 and P1.86.

Pricing is quoted per project, because the pixel pitch, cabinet quantity, control equipment, spare parts and delivery all affect the total. Share your screen size, viewing distance and installation city through the quote form and the EagerLED team will prepare your quotation.

As a working rule for indoor LED walls, allow about 1.5 m of viewing distance for each millimetre of pixel pitch, so a P1.86 wall is comfortable from roughly 2.8 m and a P4 wall from about 6 m. Brightness and content density also affect the choice; compare options on the indoor LED screen solutions page.

Cabinets run on AC 100-240 V, 50-60 Hz. In the specification tables, average consumption is 100-110 W/m2 for SMD and 80-100 W/m2 for COB, while maximum consumption reaches 300-330 W/m2 for SMD and 230-300 W/m2 for COB. Size the electrical supply and cabling on the maximum figure rather than the average.

It is an indoor LED display. Every pitch in the SMD and COB specification tables is rated IP31, and the working temperature range is -20 to +60 degrees C, so the cabinet is intended for indoor rooms such as meeting rooms, lobbies, retail stores and control rooms rather than outdoor or wet locations. See the EA600COB3 16:9 COB display for a related COB option.