EA640F3 Indoor LED Display

640 × 480 mm front-service cabinet
  • 640×480 mm cabinet with 4:3 aspect ratio
  • Magnetic modules, full front service
  • Fixed indoor installation, IP31 rated
  • 60 mm cabinet depth, 7.3 kg per cabinet
  • 320×160 mm LED modules, 6 per cabinet
  • Quick-lock cabinet assembly
  • SMD P1.25-P4 or COB P1.25-P1.86
Request an EA640F3 Quote
Linkedin
Two modular LED display panels, one silver with geometric embossed patterns and one blue neon-pattern panel behind it.

Request an EA640F3 Configuration and Quote

    EA640F3 640x480 mm Indoor LED Display

    The EA640F3 indoor LED display is designed for fixed video walls in studios, control rooms, conference halls and other commercial interiors. Choose the pixel pitch to suit the closest viewer and the smallest on-screen text.

    Two modular LED display panels one showing a bluepurple neon circuit design and the other a silver back with geometric grooves front and rear views

    Full Front Service

    Remove the magnetic LED modules from the front with a suitable vacuum service tool. The power supply and receiving card are also accessible from the front, which helps when rear access is limited.

    Hand operated vacuum suction cup attached to a large flat panel with an orange diagonal banner reading Vacuum Suction Cup

    640 × 480 mm Cabinet

    Each cabinet has a 4:3 aspect ratio. Arrange 12 cabinets in a four-wide by three-high grid to build a 2,560 × 1,440 mm video wall with a 16:9 aspect ratio.

    Internal electronic chassis with PCB boards and wiring overlaid with 640 mm width and 480 mm height dimension lines and a 43 label

    60 mm Deep, 7.3 kg

    The cabinet is 60 mm deep and weighs 7.3 kg (16.1 lb). Include the mounting structure, cabling and trim when calculating the full installation depth and load.

    Caliper measuring a objects thickness at 60 mm against an orange band reading 60mm THICKNESS

    Die-Cast Aluminum

    The die-cast aluminum cabinet provides a rigid frame for aligning adjacent cabinets. Each cabinet holds six 320 × 160 mm LED modules.

    Metallic panel with embossed diamond shaped geometric pattern close up

    Quick-Lock Assembly

    Quick locks join adjacent cabinets during assembly. The integrated adapter board keeps the module connections organized and leaves the power supply and receiving card accessible from the front.

    Inside view of an electronic control panel with a green vertical circuit board and many multicolored wires inside a gray enclosure

    SMD and COB Options

    Choose SMD from P1.25 to P4 or flip-chip COB from P1.25 to P1.86. Compare brightness, scan ratio and power by pitch in the tables below.

    Futuristic TV studio with curved seating and a large cityscape screen Studio Make sure it describes the spaces purpose for viewers using a screen reader not just appearance

    EA640F3 Indoor LED Display Specifications - SMD

    EA640F3 Indoor LED Display Specifications - COB

    Request an EA640F3 Quote

      EA640F3 Indoor LED Display FAQ

      1. What size and weight is an EA640F3 cabinet?

      One EA640F3 indoor LED display cabinet is 640 × 480 × 60 mm and weighs 7.3 kg (16.1 lb). The cabinet measures 4:3 when installed in its standard landscape orientation.

      2. Which pixel pitch should I specify for small text?

      Start with the closest viewer, the smallest text and the required native resolution. Ask for a test using your own dashboards, slides or captions at the proposed pitch. P1.25 gives the most pixels per square meter of the listed configurations.

      3. How do I get a 16:9 wall from 4:3 cabinets?

      Use four cabinets across for every three cabinets high. A 4 × 3 grid gives a 2,560 × 1,440 mm active area. A larger 8 × 6 grid produces a 5,120 × 2,880 mm active area at the same aspect ratio. Confirm the available width and height before finalizing the grid.

      4. What should I order as service spares?

      Ask EagerLED to quote matching LED modules, power supplies and receiving cards with the wall. Confirm the module batch, controller configuration and the correct vacuum service tool for the selected SMD or COB option.

      5. How should I estimate electrical load?

      Multiply the active display area by the maximum power per square meter in the specification table, then allow separately for the controller and other equipment. A 2,560 × 1,440 mm P1.25 wall at 300 W/m² is about 1.11 kW at the listed maximum before those allowances. Have the installer confirm the circuits and protection.

      6. Can the display be installed outdoors?

      The EA640F3 is rated IP31 and intended for fixed indoor environments. Specify appropriate environmental protection for locations exposed to rain, washdown, condensation or unusual amounts of dust.